Technical Facts, Specifications & Quality Control
Products
| Country of Origin | : | Malaysia |
| Technology | : | German |
| Production Method | : | DPL – Direct Pressure Laminate, acc. to EN 13329 |
Design
| Wear layer | : | Melamine resin based overlay paper |
| Decorative film | : | Impregnated decorative paper |
| Core board | : | Tropical Hardwood HDF |
| Barrier | : | Melamine resin based backing |
| Surface texture | : | Deep emboss, Silky gloss |
| Special features | : | 4 Sides Edge Protection |
| Optional features | : | Micro- V Groove |
| No | Property | Standard | Requirement (Table 1, EN13329) |
|---|---|---|---|
| 1 | Level of use | EN 13329 | AC4 |
| 2 | Abrasion class | EN 13329 | AC4 = IP-value: ≥4000 revolutions |
| 3 | Static Indentation | EN 13329 | No visible change, i.e. ≤0.01mm indentation using a straight steel cylinder, Ø=11.30mm |
| 4 | Dimensional variations after changes in relative humidity | EN 13329 | δ1 average ≤0.9mm δw average ≤0.9mm |
| 5 | Light Fastness | EN 13329 | Blue wool scale, not worse than 6, Grey scale, not worse than 4 |
| 6 | Resistance to cigarette burns | EN 13329 | ≥Grade 4 |
| 7 | Resistance to Staining | EN 13329 | 5, groups 1 and 2 4, group 3 |
| 8 | Effect of furniture leg | EN 424 | No damage shall be visible,when tested with foot type 0 |
| 9 | Effect of a castor chair | EN 425 | No change in appearance or damage |
| 10 | Formaldehyde Emission | EN 717-1 | E1 value: 0.125mg/m3 ≤0.1ppm |
